Salcar set of 2 LED solar lights with motion detector, 20 LEDs, with 1200 mAh battery

The solar lamp has silicon solar panel and 1200 mAh Li-ion battery. 800 lumens, suitable for indoor and outdoor areas such as garden gates, corridors, courtyard wall villas and shops.
The improved PIR motion sensor detects people at a distance of 3 to 5 meters. With a motion detection angle of 120°, the environment becomes brighter and safer.
3 lighting modes: 1. AUTO - Charge battery during the day, turn on in the dark. 2. PIR - Soft & high light. 3. PIR - Turn off & high light. Modes can be changed as required.
The waterproof rating of IP44 corresponds to the professional IP44 rating, is heat-resistant, frost-proof and works normally even in rain, heat or snow.
Easy to install solar lamp: Attach to the wall with the included screws without wiring (ideal installation height: 1.7-2 meters).

Intelligent motion detector with 3 lighting modes:
Mode 1. At medium brightness, the power will automatically turn on at night and automatically turn off during the day.
(Lights out at dawn, lights on at dark.)
Mode 2. Soft light sensor mode, soft light when there is no motion, full brightness when motion is detected. (Light on when people come and dim light when people go.)
Mode 3. Induction light mode: The light is off when no motion is detected and on when motion is detected. (Light on when people come and light off when people go.)
* Note: It is recommended to use mode 3 to save energy (this can extend the life of the product by about 50% and save more energy).

Technical data:
Lithium battery: 1200mAh
Detection angle: 120 °
Lumens: 800LM
Illumination angle: 120º
Detection distance: 3-5 m
Ideal installation height: 1.7-2m

Notes:
1. It is recommended to install solar lights in outdoor places without trees, buildings, etc. to absorb enough sunlight.
2. The installation distance may affect the detection range.
3. Please make sure the switch is turned on when installing, so that the solar panel will automatically light up when detected at night.
4. Remove the protective film from the solar cell module before charging.
5. After fully charged, the installation location needs up to 8 hours of sunlight
6. If it rains for several consecutive days or there is not enough sunlight, it may not light up at night because the power supply is insufficient. Please charge the solar lamp at least 8 hours after sunrise.